Thiết bị cảnh báo EVCA-AP3-W-MS – Nittan

Multi-tone Strobe Notification Appliance là thiết bị cảnh báo của Nittan thuộc nhóm conventional. Hồ sơ trình bày dữ kiện model-specific từ nguồn chính hãng được kiểm tra ngày 2026-08-12. Phạm vi nguồn đang ghi nhận: UL.

Cần thêm thông tin về model này?

Gửi câu hỏi kỹ thuật, nguồn bổ sung hoặc góp ý để Baochay.org kiểm tra và cải thiện nội dung.

Mã: nittan-evca-ap3-w-ms Danh mục:

Thông số kỹ thuật

Điện ápPower supplying for the EVCA-AP3-W-MS must be the regulated
Điện ápDC. The FWR voltage such of the NFU-7000 NAC circuit
Mức âmThe Multi-tone & strobe notification appliance, EVCA-AP3-W-MS is non-addressable, powered by 2-wire DC24V, and indoor use only. The EVCA-AP3-W-MS offer a various range of audible/visual settings in the device. The Audible settings include Broadband Horns, Horn, Bell, Siren, Slow Whoop, 500Hz Horn, and Hi/Lo that can each be set for Standard and High volume. The visual candela settings can be configured for 15, 30, 75, and 110 cd in field. The audible setting is by a dipswitch located on the back of the unit, and the candela setting is by a scroll switch on the front of the unit. When multiple units of EVCA-AP3-W-MS are connected to the EVCA-AP3-SFM, the sound and light between those units on the same line can be synchronized
Đặc điểm kỹ thuậtCandela settings — 15, 30, 75, 110 cd
Mức âmMultiple field-selectable audible settings –Broadband Horns, Horn, Bell, Siren, Slow Whoop, 500Hz Horn, Hi/Lo — High and Standard volume settings
Đặc điểm kỹ thuậtAudible settings are located on the back of the unit to prevent tampering
Đặc điểm kỹ thuậtSupports wire type : 18 to 12 AWG
Đặc điểm kỹ thuậtUL 464, UL 1971
Đặc điểm kỹ thuậtFor indoor applications

Mô tả

Multi-tone Strobe Notification Appliance là thiết bị cảnh báo của Nittan thuộc nhóm conventional. Hồ sơ trình bày dữ kiện model-specific từ nguồn chính hãng được kiểm tra ngày 2026-08-12. Phạm vi nguồn đang ghi nhận: UL.

Dữ kiện kỹ thuật đã xác minh

Thương hiệu Nittan
Model EVCA-AP3-W-MS
Điện áp Power supplying for the EVCA-AP3-W-MS must be the regulated
Điện áp DC. The FWR voltage such of the NFU-7000 NAC circuit
Mức âm The Multi-tone & strobe notification appliance, EVCA-AP3-W-MS is non-addressable, powered by 2-wire DC24V, and indoor use only. The EVCA-AP3-W-MS offer a various range of audible/visual settings in the device. The Audible settings include Broadband Horns, Horn, Bell, Siren, Slow Whoop, 500Hz Horn, and Hi/Lo that can each be set for Standard and High volume. The visual candela settings can be configured for 15, 30, 75, and 110 cd in field. The audible setting is by a dipswitch located on the back of the unit, and the candela setting is by a scroll switch on the front of the unit. When multiple units of EVCA-AP3-W-MS are connected to the EVCA-AP3-SFM, the sound and light between those units on the same line can be synchronized
Đặc điểm kỹ thuật Candela settings — 15, 30, 75, 110 cd
Mức âm Multiple field-selectable audible settings –Broadband Horns, Horn, Bell, Siren, Slow Whoop, 500Hz Horn, Hi/Lo — High and Standard volume settings
Đặc điểm kỹ thuật Audible settings are located on the back of the unit to prevent tampering
Đặc điểm kỹ thuật Supports wire type : 18 to 12 AWG
Đặc điểm kỹ thuật UL 464, UL 1971
Đặc điểm kỹ thuật For indoor applications

Điểm cần kiểm tra trước khi lựa chọn

  • Xác nhận đúng model, series, phiên bản khu vực và tình trạng vòng đời.
  • Đối chiếu nguồn cấp, phương thức đấu nối, phụ kiện/đế và điều kiện môi trường trong tài liệu hãng.
  • Kiểm tra khả năng tương thích với tủ, loop hoặc hệ thống bằng tài liệu model-specific.

Không suy diễn khả năng thay thế chéo giữa thương hiệu, series hoặc biến thể khu vực.

Nguồn và phạm vi

Nguồn và ngày kiểm tra được lưu ở từng claim; nội dung không xác nhận giá, tồn kho hoặc tư cách phân phối. Kiểm tra ngày 2026-08-12.

Thông tin bổ sung

Thương hiệu

Nittan

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “Thiết bị cảnh báo EVCA-AP3-W-MS – Nittan”

Email của bạn sẽ không được hiển thị công khai.