Còi báo cháy EH-24R – Nohmi Bosai

EH-24R là còi báo cháy thường của Nohmi Bosai. Trang này tổng hợp các dữ kiện kỹ thuật đã xác minh để hỗ trợ đối chiếu cấu hình và khả năng tương thích trước khi lựa chọn.

Cần thêm thông tin về model này?

Gửi câu hỏi kỹ thuật, nguồn bổ sung hoặc góp ý để Baochay.org kiểm tra và cải thiện nội dung.

SKU: nohmi-bosai-eh-24r Danh mục:

Thông số kỹ thuật

Mức âm• Switch Position 6 ON = HIGH dBA
Mức âm• Switch Position 6 OFF = LOW dBA
Dòng điệnEH-24 Product Horn Decibel and Current Ratings
Mức âmMinimum dBA @ 10ft. per
Mức âm• The sound output for the temporal 3 tone is rated lower since the time the horn is off is averaged into the sound output rating. While the
Điện áp* Operating the horn in this mode at this voltage will result in not meeting the minimum ANSI/UL 464 reverberant mức âm required for
Mức âmThe notification appliance shall produce a peak sound output of 100 dBA or greater at 12 VDC or 24 VDC as measured in an anechoic
Điện ápthe use of an adapter plate. The unit shall have an input dải điện áp of 16-33 volts with either direct current or full wave rectified power.

Mô tả

EH-24R là còi báo cháy thường của Nohmi Bosai. Trang này tổng hợp các dữ kiện kỹ thuật đã xác minh để hỗ trợ đối chiếu cấu hình và khả năng tương thích trước khi lựa chọn.

Dữ kiện kỹ thuật đã xác minh

Thương hiệu Nohmi Bosai
Model EH-24R
Mức âm • Switch Position 6 ON = HIGH dBA
Mức âm • Switch Position 6 OFF = LOW dBA
Dòng điện EH-24 Product Horn Decibel and Current Ratings
Mức âm Minimum dBA @ 10ft. per
Mức âm • The sound output for the temporal 3 tone is rated lower since the time the horn is off is averaged into the sound output rating. While the
Điện áp * Operating the horn in this mode at this voltage will result in not meeting the minimum ANSI/UL 464 reverberant mức âm required for
Mức âm The notification appliance shall produce a peak sound output of 100 dBA or greater at 12 VDC or 24 VDC as measured in an anechoic
Điện áp the use of an adapter plate. The unit shall have an input dải điện áp of 16-33 volts with either direct current or full wave rectified power.

Điểm cần kiểm tra trước khi lựa chọn

  • Xác nhận đúng model, series, phiên bản khu vực và tình trạng vòng đời.
  • Đối chiếu nguồn cấp, phương thức đấu nối, phụ kiện/đế và điều kiện môi trường trong tài liệu hãng.
  • Kiểm tra khả năng tương thích với tủ, loop hoặc hệ thống bằng tài liệu dành riêng cho model.

Không suy diễn khả năng thay thế chéo giữa thương hiệu, series hoặc biến thể khu vực.

Tài liệu tham khảo

Thông tin bổ sung

Thương hiệu

Nohmi Bosai